Mobile Wifi Router Fs020w User Manual

| Posted on by

This blog is about the Huawei E5885 user manual. The Huawei E5885Ls-93a user manual guides users to know the Huawei E5885. And the Huawei E5885 manual tells how to use and setup Huawei E5885 mobile hotspot.

  1. Mobile Wifi Router Fs020w User Manual 2017
  2. Mobile Wifi Router Fs020w User Manual Software
  3. Mobile Wifi Router Fs020w User Manual Online
  4. Mobile Wifi Router Fs020w User Manual Download
  5. Mobile Wifi Router Fs020w User Manual Instructions

Huawei E5885 Appearance

Thank you for purchasing the Mobile WiFi. This Mobile Global Map Raster Devel- opment (GMRD) Tool User`s Manual. はじめに このたびは、Mobile WiFi Router FS020W(以下、本製品)をお買い上げいただき、誠にありがとうございます。ご利 用の前に、この取扱説明書をよくお読みいただき、正しくお使いく. Bit -drive manual. 4 WiFiルータ FS020Wの設定. 4-1 FS02 0W （富士ソフト製）の仕様. 4-2 ネットワーク接続の設定方法 FS020W. LAN 接続に対応したPC もしくはスマートフォンが必要になり ます。 1 設定に必要な値を確認.

  1. WPS button: To connect a WPS-enabled device to your HUAWEI Mobile WiFi Pro2 using the WPS button. When WPS is enabled, press and hold the button for more than five seconds to set up a WPS connection.
  2. Screen
  3. Slot cover
  4. Power button: Press and hold to turn your HUAWEI Mobile WiFi Pro2 on or off.
  5. Lanyard hole
  6. Output charging port
  7. Micro USB port
  8. Ethernet port
  9. NFC sensor: Use NFC function to establish a Wi-Fi® connection.
  10. Reset button: Press and hold to restart your HUAWEI Mobile WiFi Pro2 and restore it to its factory settings.

Note: If you forget the username, password or SSID for your HUAWEI Mobile WiFi Pro2, try restoring the device to its factory settings.

Huawei E5885 SIM card and SD card Installation

Network connection

You can view the current SSID (Wi-Fi network name) and Wi-Fi network key on the screen.

We strongly recommend that you change the default SSID and Wi-Fi network key to keep your data secure.

HUAWEI Mobile WiFi Pro2 as a router

Use a network cable to reduce mobile data usage.

HUAWEI HiLink app

Download the HUAWEI HiLink app to manage your HUAWEI Mobile WiFi Pro2 more easily.

* Change the SSID and Wi-Fi network key.

* Check data traffic and SMS messages.

* Check roaming state and signal strength.

Note:

* You can also manage your HUAWEI Mobile WiFi Pro2 through the web interface at http://192.168.8.1. The default username and password is admin.

* Click Help in the upper right corner of the web interface to learn more about your HUAWEI Mobile WiFi Pro2.

Connect to Huawei E5885 Wi-Fi via NFC(optional)

If you are using a device (such as an Android phone or tablet) with NFC functionality, you can connect automatically to Wi-Fi by simply touching your device against the NFC sensor on the HUAWEI Mobile WiFi Pro2.

Before starting, make sure that your phone or tablet is unlocked and that NFC is enabled. Ensure that your HUAWEI Mobile WiFi Pro2 is powered on and that you have the HUAWEI HiLink app installed on your device.

  1. Touch your device against the NFC sensor on the HUAWEI Mobile WiFi Pro2, as shown in the following figure.
  1. When detection is successful, the HUAWEI HiLink app will automatically open on your device and you will be connected to Wi-Fi. The Wi-Fi icon should be visible in the status bar of your device if connection has succeeded.

Note:

* This feature is not available for iOS devices.

* If HUAWEI HiLink is not installed on your device, touching the device against the NFC sensor on the HUAWEI Mobile WiFi Pro2 will automatically bring up the Choose an action screen. From here, select New tag scanned (the name of this option may vary by device) and follow the link to download and install the HUAWEI HiLink app.

* You can also download and install HUAWEI HiLink by scanning the QR code in the HUAWEI HiLink app section of this manual. Alternatively, search for and download HUAWEI HiLink in Google Play or the HUAWEI App Center.

Huawei E5885 Wi-Fi extender (optional)

The Wi-Fi extender feature increases Wi-Fi coverage and connects to Wi-Fi networks where available to reduce mobile data usage.

On the HUAWEI HiLink app, enable the Wi-Fi extender function, and connect HUAWEI Mobile WiFi Pro2 to a Wi-Fi network.

Huawei E5885 Charging other devices

You can charge your phone or Bluetooth headset with the HUAWEI Mobile WiFi Pro2 using a charging strap or charging cable.

Method 1: Charging other devices using the charging strap

  1. Please open the charging strap as indicated in the figure.

Note: The charging strap is a standard accessory.

  1. Insert the charging strap in the port shown in the figure.

Method 2: Charging other devices using a charging cable

Note: Your HUAWEI Mobile WiFi Pro2 will not be able to charge other devices when it has a low battery or is overheating.

Huawei E5885 Power Charging

Please only use compatible chargers provided by a designated manufacturer.

Note: The charger is an optional accessory. To buy a charger, please contact an authorized retailer.

User Tips for Huawei Mobile WiFi Pro2:

  1. Why isn’t my HUAWEI Mobile WiFi Pro2 responding?

> Try restarting the device. If that doesn’t work, restore the device to its factory settings.

  1. Why can’t I connect to my HUAWEI Mobile WiFi Pro2 sometimes?

> To save power, your HUAWEI Mobile WiFi Pro2’s Wi-Fi auto off feature is designed to turn off Wi-Fi when there haven’t been connections for a while. You can press the POWER button to turn on Wi-Fi again. Alternatively, you can disable this feature, although this might impact battery life. Log in to the web interface and disable the Wi-Fi auto off feature.

  1. Why won’t my HUAWEI Mobile WiFi Pro2 connect to a network even though all the settings are correct?

> The PIN verification feature might be enabled. Launch HUAWEI HiLink and enter the correct PIN.

> You can disable this feature if you find entering the PIN regularly inconvenient.

> From the HUAWEI HiLink app, select Settings and then disable the PIN verification feature.

  1. Why can’t I access the web interface at 192.168.8.1?

> This is likely due to an IP address conflict when the HUAWEI Mobile WiFi Pro2 assigns itself a new IP address. Please try 192.168.9.1 in this case. If your HUAWEI Mobile WiFi Pro2 has an LCD screen, the new IP address of your web interface will be displayed.

  1. Why won’t my HUAWEI Mobile WiFi Pro2 power on?

> Your battery is probably out of power.

> Charge your HUAWEI Mobile WiFi Pro2 for a while and power it back on.

  1. Why did my HUAWEI Mobile WiFi Pro2 power off all of a sudden?

> Your HUAWEI Mobile WiFi Pro2 may overheat when you use it continuously over a long period of time, and thereby trigger its automated protection system. Wi-Fi will be turned off and your HUAWEI Mobile WiFi Pro2 will power off if this occurs.

> Please ensure the device is properly ventilated and cooled before you power it on again.

Check more about Huawei E5885 features here: https://www.4gltemall.com/huawei-mobile-wifi-pro-2.html

This router is not available to order anymore. If you're looking to get one, see Coverage devices for new options.

If you want help with Wi-Fi CellSpot Router setup or connection issues, we have you covered.

On this page:

Set up a Wi-Fi CellSpot Router

Get to know your router

T-Mobile's Wi-Fi CellSpot Router improves the Wi-Fi signal in your home. The router lets you use Wi-Fi Calling for calls at home, instead of the cellular network. Calls are prioritized over other Wi-Fi data for best call quality.

It doesn't boost wireless network signal, but it does provide:

  • 3,000+ sq. ft of Wi-Fi for placing calls at home.
  • 2.4 & 5 GHz bands
  • IEEE 802.11a/b/g/n/ac
  • IPv4 & IPv6
  • Security: WEP, WPA-PSK/ENTERPRISE, WPA2-PSK/ENTERPRISE, WPS

Internet requirements

You need internet with reliable high-speeds to support Wi-Fi Calling. Try a speed test when connected to your home internet to check for:

  • 2 Mbps upload speed
  • 2 Mbps download speed

Set up your router

Setup video (English)

Video not loading? Please reload this page and try again. If you're on a computer, also make sure you have free Adobe Flash Player installed.

Configuración de video (Español)
Start guides (Printable)

Click to download the Wi-Fi CellSpot Router Setup guide and User manual.

Mobile Wifi Router Fs020w User Manual 2017

Start guide or user manual not opening? Install the free Adobe PDF viewer on your computer, Android, or Apple iOS device.

Connect your phone to the router

  1. On your phone, turn on Wi-Fi. (If you need steps, find your phone on the Devices page.)
  2. Select one of the T-Mobile Wi-Fi networks:
    • CellSpot_2.4GHz_[4-digit ID]
    • CellSpot_5GHz_[4-digit ID]
    • (If the network name was changed, select the new network name instead.)
  3. Enter the password on the white sticker on the back of your router.
  4. Update the network name and password on your computers, tablets, etc.

Change network name (SSID) or password

  1. Make sure your computer or phone is connected to the router.
  2. Enter either URL in the web browser:
    • http://cellspot.router (phones use this link)
  3. Log in to the configuration page using your login name and password.
    • The default router login is name (admin) and password (password).
    • If you set up your own password and have forgotten it, reset the router.
  4. See the SSID and password steps below to update.

Network name (SSID)

  1. From the General tab, select the CellSpot_5GHz_[4-digit ID] and change its name.
  2. Update the WPA Pre-Shared Key to your previous network password.
  3. Click Apply.
  4. Reconnect your devices to the Wi-Fi network.
  5. Use the 2.4GHz band if connecting existing devices (printers, cameras, etc.).

Mobile Wifi Router Fs020w User Manual Software

Password

  1. On the Network Admin page, go to the System Status section of the Network Map.
  2. Click the 2.4GHz tab.
    • In the Authentication Method drop-down, click WPA2-Personal.
    • In the WPA-PSK key field, enter a password that is at least eight characters.
  3. Click the 5GHz tab.
    • In the Authentication Method drop-down, clickWPA2-Personal.
    • In the WPA-PSK key field, enter a password that is at least eight characters. You can use the same password you entered in step 4.
  4. Click Apply, and the router restarts.
  5. Once restarted, reconnect using your new password. If you lose this password, the router must be reset to its default settings

Reset router

Restart router & modem

Restart the modem and router before performing a full reset. This can fix minor problems, and also check for and install firmware updates.

Mobile Wifi Router Fs020w User Manual Online

  1. Unplug your modem.
  2. Unplug your router.
  3. Turn off your computers.
  4. Plug in the modem, and wait for two minutes.
  5. Plug in the router, and wait for two minutes.
  6. Turn the computers on.

Reset the router

  1. Press and hold the Reset button on the back of the router for eight seconds.
  2. Release the Reset button.
  3. The router is now reset to the factory default settings.

Mobile Wifi Router Fs020w User Manual Download

Default router settings

Resetting the router restores it to its default settings, which are listed below.

Mobile Wifi Router Fs020w User Manual
  • User Name: admin
  • Password: password
  • Enable DHCP: Yes (if WAN cable is plugged in)
  • IP address: 192.168.29.1
  • Domain Name: (Blank)
  • Subnet Mask: 255.255.255.0
  • DNS Server 1: 192.168.29.1
  • DNS Server 2: (Blank)
  • SSID (2.4GHz): CellSpot_2.4GHz_(four digit MAC ID)
  • SSID (5GHz): CellSpot_5GHz_(four digit MAC ID)

If your previous network name is different than the defaults, update your existing device network settings.

Troubleshoot issues with your Wi-Fi CellSpot Router

Router has no lights
  1. Make sure all cables are connected to the right place, and plugged in completely.
  2. Plug the router into another power outlet to test it.
  3. Make sure the router is set up properly. For steps, see router setup above.
Forgot router admin username or password

If you forgot your username or password, follow reset the router above.

Can't access router admin pages

If you can't access the router admin, follow these steps.

  1. Make sure your computer or phone is connected to the router.

  2. On the computer, enter either address in the address bar and open the page:

    • http://cellspot.router (phones use this link)
  3. Log in to the configuration page using your login name and password. The default router login is name (admin) and password (password).
    • If this is the first time accessing, you are prompted to change the password. Note your new router admin username and password to use it later. Passwords cannot be recovered.
    • If the password is lost, follow reset the router above.
  4. If you're still unable to access the admin pages, contact us.
Can't connect phone to router

Mobile Wifi Router Fs020w User Manual Instructions

  1. Turn off the phone.

  2. Wait five seconds, then turn on the phone.

  3. Try to connect your phone to the router.

  4. If that didn't work, follow reset the router above. Then try reconnecting.

  5. Use another phone or computer to see if other devices can connect (or are connected) to the network.
  6. If other devices can connect, the router is ok. The problem is with device that wont connect. Check its settings and user manual.
  7. If no phones or computers can connect, contact us.
Can't connect to Internet
  1. Make sure that:
    • Router and modem are plugged in.
    • WAN and LAN lights are illuminated.
    • Computer or connected device is connected to the correct network.
    • Network is set up properly. For steps, follow router setup above.
  2. Turn off the connecting device, and turn it back on.
  3. Try to access the Internet.
  4. If you are still having this issue, contact us.
Slow internet
  1. Verify the following:
    • Is the blue indicator light (looks like a globe, fifth from the right) illuminated?
      • Yes: You are receiving an Internet connection from your modem.
      • No: The router is not setup correctly. See router setup above.
    • Are there blue lights above 2.4 GHz or 5 GHz on the front of the router?
      • Yes: The router is broadcasting wireless signal.
      • No: Wi-Fi is off. Press the Wi-Fi on/off button on the right side of the router to turn it on.
  2. If the answer to both questions above is yes, your router is set up correctly. (If not, reset the modem and router above.)
  3. Load a web page and see if your speed has improved.
    • Internet speeds are determined by your Internet provider (ISP). T-Mobile isn't providing the service.
    • Contact your Internet provider (ISP) to report slow Internet, if problems continue.
No wireless network available / not broadcasting Wi-Fi

Determine if network is set up properly and wireless signal is broadcasting from Wi-Fi CellSpot Router:

  1. Make sure the router is turned on. The Power button on the back of the router must be pressed in.
  2. Are any of the router lights illuminated?
    • Yes: Skip to step 5.
    • No: Move to the next step.
  3. If no lights are on, press the LED on/off buttonon the back of the router, and wait five seconds.
  4. Is the blue indicator light (looks like a globe, fifth from the right) illuminated?
    • Yes: Move to the next step.
    • No: Follow router setup above.
  5. Are the blue lights illuminated above the 2.4 GHz or 5 GHz icons?
    • Yes: The router is broadcasting wireless signal. Follow connect your phone to the router above.
    • No: Wi-Fi is turned off. Press the Wi-fi on/off buttonon the side of the router to turn on Wi-Fi.
  6. If you are still unable to locate your wireless network using a T-Mobile phone, contact us.